Imitation Tile Profiled Panel, Tile Panel

chapa perfilada imitacion teja chapa teja

CHARACTERISTICS

Length:	Multiples of 350 (N * 350) + 270 mm (ej. 3.770mm)
Maximum length	13.220 mm
Useful width	1.015 mm
Thickness of the sheet	de 0.40 a 0.60 mm

Black

Ral 8004

Yellow Albero

Consult other colors and characteristics.

The Profiled Imitation Tile panel for roofs is a ribbed design for use as a roof or lean-to, consisting of a galvanized steel sheet with 7 ribs (6 complete and one lateral overlap), with customisable finishes and combinations of paint, colours and steel thickness. They can be used individually, such as awnings, or as cladding for insulation or existing cover or roof needing renovation.

The panel is designed for roofs with a minimum slope of 5%, although over 7% is recommended, on any metal, wood or concrete support. The flange of the integrated lateral overlap in a false rib forms the joint between two panels, enables rapid fitting, watertight assembly and good appearance of the roof.

We have all the auxiliary fastening elements required, screws, Capelottis and trims for the Tile panel.

As with all products, the Tile panel is customisable by selecting the colour and profile of the outer surface. Please see the technical data sheet for further information.

It is NOT compatible with the AIS COPPO panel!